Home » Repair Rolling Door Operator, Can not function

Repair Rolling Door Operator, Can not function

Repair rolling door project, implemented in an industrial warehouse in the Flamo area, Batam.

Equipment Specification

ROLLING DOOR OPERATOR :

  • MODEL KJ600 series
  • POWER SUPPLY 220V,50 Hz
  • MOTOR SPEED 1250 rpm 
  • RATED POWER 370 W
  • RATED CURRENT 4.0 Amp
  • PLC TYPE OMRON SYSMAC CPM1A

About Rolling Door Operator KJ600

Advanced Features

  • Overheat protection
  • Electric and manual operation
  • Release chain in case of power failure
  • Limit switch unit enables precise adjustment of door in up and down positions
  • Safety device for preventing the vehicle or people from damage in case of roller chain is break off
  • Easy installation, legerity design, low noise, small power consumption

Technical data

ModelInput power (V)Output torque (N.m)Max. Lift (Kg)Rotate speed (r/min)Max. operatirng range (high:m)Roll (inch)Chain
KJ3002201603006.564”41
KJ6002204106006.565”50
KJ800220640800596”50
KJ100022071010005.596”60
KJ800S380850800596”50
KJ1000S38087010005.596”60
KJ1300S380140013006.498”60
KJ1500S380160015004.998”80

Quick Details

  • Place of Origin: China
  • Brand Name: Xianfeng Machinery
  • Model Number: 300kg-2200kg
  • Type: Automatic Door Operators

Problems Occurred ( information from the owner / user )

  • Rolling door can not function.
  • Rolling door motors high temperature so that contact thermal overload

Parts of the Job

  • Check the motor rolling door operator, if found damage actions to be taken to replace or repair the motor.
  • Check the control motor and sensor thermal motor.
  • Check the operating control and sensors are connected.

Documentation

Repair Rolling Door Motor
Repair Rolling Door Motor
Repair Rolling Door Control Motor
Repair Rolling Door Control Motor

Materi Job

Leave a Reply

Your email address will not be published. Required fields are marked *